How To Clean A Contigo Autoseal Lid
Mugs
-
SNAPSEAL™ Byron
Download PDF
- Careful. The beverage you are about to enjoy may be very hot. For best results always use caution.
- Keep out of reach of children when filled with hot liquids.
- To properly use your SNAPSEAL™ mug:
- Prior to drinking, make sure the lid is properly threaded to the body and screwed down completely.
- If filling with boiling liquid, allow liquid to cool down WITH THE LID OFF for at least 3 minutes before attaching the lid.
- When attaching lid, make sure the drink seal is in the open position.
- DO NOT overfill. Fill liquids to just below the fill line in the body as shown.
- DO NOT microwave or freeze.
- DO NOT use cleaners containing bleach, chlorine, abrasives, and/or other harsh chemicals.
- DO NOT continue to use product if damaged.
- DO NOT carry bottles containing liquid in bags to help prevent accidental opening.
- Suitable for hot or cold beverages.
- The SNAPSEAL™ lid came with your new purchase is designed to fit only your new mug. Not for use with other products.
- To attach the lid, apply slight downward pleassure and rotate counter-clockwise until you hear a click and lid falls into place. Then rotate lid clockwise to tighten completely.
- Wash thoroughly before first use.
- Snap open the drink seal before rinsing or washing.
- Rinse immediately after each use with warm water.
- Lid and UNPAINTED stainless steel body are top-rack dishwasher safe. HAND-WASH ONLY any PAINTED stainless steel body.
- To wash by hand, soak the lid for 10 minutes in hot, soapy tap water. Hand-wash the body with warm water and a mild detergent. Rinse both the lid and body thoroughly before use.
ALWAYS STORE TUMBLER WITH LID REMOVED to allow all parts to dry completely.
For complete warranty information, see GoContigo.com
-
AUTOSEAL® West Loop
Download PDF
- Careful. The beverage you are about to enjoy may be very hot. For best results always use caution.
- Keep out of reach of children when filled with hot liquids.
- To properly use your AUTOSEAL® mug:
- Prior to drinking, make sure the lid is properly threaded to the body
and screwed down completely. - If filling with boiling liquid, allow liquid to cool down WITH THE LID OFF
for at least 3 minutes before attaching the lid. - Avoid accidental depressing of the AUTOSEAL® button by keeping
the button free and clear of other objects. - DO NOT overfill. Fill liquids to just below the fill line in the body as shown.
- DO NOT microwave or freeze.
- DO NOT use cleaners containing bleach, chlorine, abrasives,
and/or other harsh chemicals. - DO NOT use with pulpy beverages.
- DO NOT continue to use product if damaged.
- DO NOT carry bottles containing liquid in bags to help prevent accidental opening.
- The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
- Suitable for hot or cold beverages.
- The AUTOSEAL® lid that came with your new purchase is designed to fit
only your new mug. Not for use with other products. - To attach the lid, apply slight downward pressure and rotate counter-clockwise until you hear
a click and lid falls into place. Then rotate lid clockwise to tighten completely. - Use this mug's lock feature to avoid unintended depressing of the AUTOSEAL® button.
- Wash thoroughly before first use.
- Flip open the cover inside of the lid before rinsing or washing.
- RINSE LID IMMEDIATELY AFTER EACH USE with
warm water, pressing the AUTOSEAL® button so
water flows through the Drink Spout and Vent Hole. - Lid and any UNPAINTED stainless steel body are top-rack dishwasher safe.
HAND-WASH ONLY any PAINTED stainless steel body.
- To wash by hand, soak the lid for 10 minutes in hot, soapy tap water.
Hand-wash the body with warm water and a mild detergent.
Rinse both the lid and body thoroughly before use. - For best cleaning result, use a Contigo bottle + spout brush available at www.GoContigo.com
- After cleaning, return lid interior to its closed position before use.
- ALWAYS STORE BOTTLE WITH LID REMOVED to allow parts to dry completely.
For complete warranty information, see GoContigo.com
-
AUTOSEAL® West Loop 2.0, Stainless
Download PDF
- Careful. The beverage you are about to enjoy may be very hot. For best results always use caution.
- Keep out of reach of children when filled with hot liquids.
- To properly use your AUTOSEAL® mug:
- Prior to drinking, make sure the lid is properly threaded to the body
and screwed down completely. - If filling with boiling liquid, allow liquid to cool down WITH THE LID OFF
for at least 3 minutes before attaching the lid. - Avoid accidental depressing of the AUTOSEAL® button by keeping
the button free and clear of other objects. - DO NOT overfill. Fill liquids to just below the fill line in the body as shown.
- DO NOT microwave or freeze.
- DO NOT use cleaners containing bleach, chlorine, abrasives,
and/or other harsh chemicals. - DO NOT use with pulpy beverages.
- DO NOT continue to use product if damaged.
- DO NOT carry bottles containing liquid in bags to help prevent accidental opening.
- The AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
- Suitable for hot or cold beverages.
- The AUTOSEAL® lid that came with your new purchase is designed to fit
only your new mug. Not for use with other products. - To attach the lid, apply slight downward pressure and rotate counter-clockwise until you hear
a click and lid falls into place. Then rotate lid clockwise to tighten completely. - Use this mug's lock feature to avoid unintended depressing of the AUTOSEAL® button.
- Wash thoroughly before first use.
- Flip open the cover inside of the lid before rinsing or washing.
- RINSE LID IMMEDIATELY AFTER EACH USE with
warm water, pressing the AUTOSEAL® button so
water flows through the Drink Spout and Vent Hole. - Lid and any UNPAINTED stainless steel body are top-rack dishwasher safe.
HAND-WASH ONLY any PAINTED stainless steel body.
- To wash by hand, soak the lid for 10 minutes in hot, soapy tap water.
Hand-wash the body with warm water and a mild detergent.
Rinse both the lid and body thoroughly before use. - For best cleaning result, use a Contigo bottle + spout brush available at www.GoContigo.com
- After cleaning, return lid interior to its closed position before use.
- ALWAYS STORE BOTTLE WITH LID REMOVED to allow parts to dry completely.
For complete warranty information, see GoContigo.com
How To Clean A Contigo Autoseal Lid
Source: https://www.gocontigo.com.au/care-and-use-guides/
Posted by: rodriguezaguied.blogspot.com
0 Response to "How To Clean A Contigo Autoseal Lid"
Post a Comment